PRODUCTS AND SERVICES

 Back to Products for Iron and Steel Foundry > Inoculant in Grain

LC Graphidox

APPLICATION

The elements titanium and calcium provide a graphitizing and deoxidizing effect for cast iron with lamellar graphite. In addition, the titanium contained in the LC Grapi- dox reacts with the nitrogen in the molten metal. The soluble nitrogen is thus inef- fective, minimizing the possibility of nitrogen porosity.

REFERENCE ANALYSIS

% Si 50 – 55
% Ti 9,0 – 11,0
% Al 0,5 – 1,5
% Ca 0,5 – 1,5
% Fe residual

ADDITION RATE

Addition rate for ladle inoculation is approx. 0.1 – 0.2% by weight.

SIZING

  • 0,124 – 0,7 mm* (in stream inoculation)
  • 0,3 – 6 mm (ladle inoculation)

* At this size, the Si level is slightly below the value specified above.

PACKAGING

  • 25 kg paper sacks on pallet
  • 150 kg steel drums on pallet
  • 1000 kg big bags on pallet

The containers must be covered with a protective film.

SHELF LIFE AND TRANSPORT

LC Graphidox can be stored indefinitely in its original packaging. The effects of hu- midity are to be avoided. Relevant hazardous substance regulations must be com- plied with. Our Shipment Handling department can provide further information. LC Graphidox is not a hazardous substance as defined by transport regulations.

PRODUCTS AND SERVICES

Do you need to ask us any questions?
Contact us